Product > Optical Components > Bases

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Mounting Post

The stainless steel post and the aluminum alloy anodized holder pairs allow settings of adjustable height. These posts are threaded at both end with different taps to provide more flexibility of mounting. An optional collar 03HFC-1 can be attached to the post to fix its height while leaving the angle of post unconstrained.

• Post 0.5 inch (12.7mm) diameter.

• 8-32 (M4) tapped hole on one end; ¼ -20(M6) tapped hole on other end.

• Can be attached directly to threaded surfaces or base.

Collar

The collars provide a lock and/or an index point for specific post heights.

• Optional 03HFC-1 Collar allows post to be rotated without effecting height.

specs

With threaded hold on the bottom end, these post holders are easy to attach on either bases, tables or breadboard. All post holders are equipped with a thumbscrews to secure post in position. The combination of various post holder with mounting posts of different height makes it possible to meet the applications height.

• Inner Dia. 0.5 inch.

• Arbitrary height could be reached with different posts.

specs

V-grooved post make sure the azimuth sustained while the elevation be adjusted. And the azimuth also can be designated with the thumbscrew in the bottom of holder.

• Posts and Holders available in 0.5 inch (12.7mm) and 0.7 inch (18mm) diameter.

• V-groove prevents Post from turning in Holder while adjusting elevation.

• Bottom of Holder can be rotated 360° and locked for optional axis alignment.
  
   

back to top