Product > Optical Components > Holders & Mounts

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Self-Centering Lens Holder

Any lens up to the maximum inner diameter of these holders can be secured with equal convenience and exact, repeatable center location independent of lens diameter. Quick releasing arms can be opened immediately upon grasping the two outer wings provided on these holders. When a lens is positioned, the spring-loaded fingers on the arms can hold the lens gently in place.

• Hold optics up to 3.9 inch (100m) diameter.

• Spring-loaded arms automatically center optics in the holder.

• Ideal when using optics of various diameters interchangeably without changing optical axis height.

specs

Round mirrors or beamsplitters are held firmly in place by a metal mount of wealthy width for robust positioning. Once have mirrors or beam-splitters in place, coarse and fine adjustments are available for elevation. Furthermore, It is possible to place such mounted components at an arbitrary elevation when the system is held at a fixed azimuth.

• Coarse and fine adjustments for elevation.

• Full 360° rotation for azimuth.

• Models hold optics of 2,4, and 6 inch (50.8, 101.6 and 152.4mm) diameter.

specs

Filters or test targets are held instantly while sliding them behind stainless steel spring clips. Repeatability is maintained by the flat backplate and a right-angle guide on one upright. The threaded hole on the bottom to meet versatile application.

• Holds 2 inch x 2 inch (50mm x 50mm) square filters or test targets.

• Round filter Ø2 inch (or Ø50mm) is available.

• One upright has a L-shaped design for interchanging optics without disturbing its optical axis.

• Stainless steel spring clips hold filters firmly in place.

This holder is designed to handle for both square and round filters. Filters are fitted in place immediately by simply setting them down; realignment is guaranteed by machined dovetail stops. Additionally, two filters can be held independently. For dual filter mounting, the filters do not come into contact and potential scratching is avoided. The low profile design provides a minimum obstruction of working light.

• Holds one or two filters with minimum aperture obstruction.

• Accepts either square or round filters.

• Hold filters separately to prevent scratching.

specs

Plate holder 04PHF-1 is a simple holder for thick plates of up to 10mm thick. The spring strip and rub-resistant pad design provide a firm and scratch-free support for variety of plates.

• For thicker plates up to 10mm.

• Spring strip and rub-resistant pad hold plate firmly without scratching.

The straightforward design is built to handle square optical devices with fixed width. They are positioned by sliding in from the top. His ease of handling allows quick handling without distracting the operator. Yet, accuracy is maintained by precision machining and adjustable spring tension to keep the device perpendicular to the to optical axis.

• For 2 inch x 2 inch (50mm x 50mm) square filters, plates, test targets.

• Adjustable spring tension holds plates perpendicular to optical axis.

• Special inclined design for working in the dark.

• Maximum plate thickness, 3mm.

• Mounts on ¼-20 (M6) post of threaded base.

specs

The straightforward design is built to handle square optical components with fixed width. Optical components are positioned by sliding in from the top and kept in a direction perpendicular to its optical axis through the tension of a spring. The ease of handling allows quick handling without distracting the operator. Yet, accuracy is maintained by precision matching.

• Similar to 04PHF-2 (M) but with active design to hold plates from 1.5 inch to 5.0 inch (38mm to 127mm) in width.

• Maximum plate thickness: 3mm

• Special inclined design for working in the dark.

• Clearance holes on base for ¼-20 (M6) and 8-32 (M4) for attachment to posts, bases and table surfaces.

specs

> Prism, Tilt & Rotary Table

> Mirror, Tilt, Rotary & Beamsplitter Mount

> Mirror Mount

> BeamSplitter Mount

> Lens, Filter & Polarizer Holders

back to top