Product > Optical Components > Holders & Mounts

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Cylindrical Laser Mount

This robust mount securely fastens long cylindrical devices such as laser tube. Thumbscrews firmly mount the laser tube at both ends to maintain a dependable mounting. A clearance-mounting hole located at the center of gravity allows a quick and reliable setup and an easy access to the mounting screw from the top. A tilt form-7mm to +4mm is provided for fine tuning.

• +4mm,-7mm tilt adjustment for aligning laser beam.

• Accepts cylindrical lasers up to 55mm diameter.

• Clearance hole for ¼-20 (M6) mounting.

Cylindrical Laser Mount

Laser mount 04LMC-2(M) offers a simple way of mounting laser tube in place to all optical surfaces. Three ¼-20 (M6) clearance holes are provided for flexible positioning.

• Accepts cylindrical lasers up to 55mm diameter.

• Clearance hole for ¼-20 (M6) mounting hole.

The 04LMS series offers a simple and stable way of mounting laser tube or other cylindrical objects to surface like optical table. A nylon-tipped set screw is provided to prevent laser tube from wobbling while mounted in place.

• Simple, stable way of mounting round laser tubes.

• Laser held without wobbling by nylon tipped setscrew.

• Clearance slot provides ±3° pitch adjustment.

Precision laser mount 04LMP series are useful when direct position reading is necessary. Two independent precision micrometers are provided for adjustment of ±4° in two perpendicular axes. A nylon-tipped setscrew is provided to prevent laser tube from wobbling while mounted in place.°

• Individual, precision micrometers provide adjustment in two axes.

• Adjustment range, ±4°.

• Laser held without wobbling by nylon tipped setscrew.

• Four diameter models for laser heads with diameter of 1.28, 1.4, 1.53,1.76 inch (32.5, 35.6, 38.8 and 44.7mm)

> Prism, Tilt & Rotary Table

> Mirror, Tilt, Rotary & Beamsplitter Mount

> Mirror Mount

> BeamSplitter Mount

> Lens, Filter & Polarizer Holders

back to top