Product > Optical Components > Other Components

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Rod Clamp

This rod clamp is used to secure virtually any optical component to a stand rod. A wealthy selection of threaded holes is provided on the mount face for flexible mounting. The unit is clamped onto the rod by tightening a knurled knob with large diameter. As an opion, a gear can also be included for a rack-and-pinion adjustment in addition to its clamping capability.

• For use with 1.5 inch (38.1mm) diameter stand rods.

• Model 07RCP-2 (M) has both rack-and-pinion and clamping capabilities.

• Clamp face contains an array of ¼-20 (M6) threaded mounting holes.

specs

Large Stand Rods

These rods provide a rigid support for many applications. Heavy loads can be safely attached to the thick cylinder. A rack gear option is available for and pinion positioning of height settings. Four standard clearance holes are machined in the base for a sturdy mounting.

• 14 inches (36cm) tall x1.5 inches (38.1mm) diameter.

• Base fitted with ¼-20 (M6) clearance holes on 2-inch (50mm) center for table attachment.

• Model 07LSR-2(M) equipped with rack gear for rack-and-pinion adjustment.

specs

back to top