Product > Optical Components > Stages

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Precision Crossed-Roller Translation Stage

This stages are designed to support compact components with great loads while maintaining accuracy and stability. General layout of holes for versatile mounting.

• Choice of three travel ranges, two levels of precision.

• Center or side-mounted micrometers.

• Both ¼-20 (M6) and 8-32 (M4) threaded and clearance holes are available for convenient mounting.

• Angular deviation ≤ 125 μrad, for 06PTS-series.

  

specs

Precision Crossed-Roller Translation Stage

These translation stages use linear cross-roller bearings to achieve larger load capacity and higher precision. There are one, two or three micrometers in the one-, two- or three-axis translation stage to provide precise translation control in each axis. Each model has two types of threaded holes on working surface for specific mounting need.

• Linear cross-roller bearing design for larger load capacity and higher precision.

• Center mounted micrometers for precise translation control.

• Two types of threaded holes on working surface and counter-bored holes on the base.

• Angular deviation ≤ 125 μrad.

 

   specs

2-Axis Crossed-Roller Bearing Translation Stage

Linear crossed-roller bearing design to support compact components with great loads while maintaining accuracy and stability. General layout of holes for versatile mounting.

• Rails in contact with crossed-roller bearing are made of polished carbon steel in order to ensure long lasting precision and smoothness.

• Compact design with a stage height of only 40.5mm.

• Lockable with a set screw along each axis.

• Travel range along each axis: 13mm, or 25mm.

• Angular deviation along each axis ≤ 125 μrad.

• Minimum reading of the micrometer: 0.01mm.

   specs

back to top