Product > Optical Components > Stages

Optical components include the standard optical elements such as prism, lenses, microscope objectives, aspherical lens, opto mechanic and even opto electronic components. We also supply a wide range of lasers, motion-control systems, test & measurement instrumentation and customized optical breadboard.

Rotation Stage

This stage is fitted with a standard threaded holes and rotates continuously through a full 360° degrees. The coarse adjustment by thumbscrew is used for quick positioning to a desired angle. An easily accessible set screw on one side is used to fix it at any desired angle.

• Full 360° rotation with thumbscrew.

• 1° or 2° -graduated increments.

• ¼-20 (M6) and 8-32 (M4) threaded holes for mounting optics or components.

• Thumb screw lock stage in position.

• Load capacity -5kg.

specs

Rotation Stage

This stage is fitted with a standard clear aperture 1” or 2” and rotates continuously through a full 360 degrees. It is convenience for holding the optics firmly with a threaded ring. The coarse adjustment by thumbscrew is used for quick positioning to a desired angle. An easily accessible set screw in the side is used to fix it at any desired angle.

•  Similar to above but with 1- or 2-inch threaded, clear aperture through center of stage for mounting optical components.

specs

Precision Rotation Stage

Precision rotation stage 06RSP-3 is similar to rotation stage 06RSA-1, 2 but is fitted with a standard clear threaded aperture of 1-inch and has a micrometer to further provide micro-adjustment with resolution up to 0.01mm for precise angular positioning. This rotation stage can also be used with standard translation stage to provide X-, XY- and XYZ-Theta positioning.

• Both macro- and micro-adjustments.

• 1-inch (25mm) clear, threaded aperture through center of stage.

• May be used with standard translation stage for X-, XY- and XYZ-Theta positioning.

• Load Capacity of up to 1kg.

• Resolution to 0.01mm.

specs

Precision Rotation Stage

Precision rotation stage 06RSP-4 is a solid stage fitted with several threaded holes for flexible mounting. This stage is also capable of continuous rotation through a full 360 degrees. Both coarse and fine adjustment screws are used for positioning to and exact angle. This stage is gauged with the resolution of a sub-degree vernier.

• Full 360° coarse manual adjustment.

• Fine pitch lead screw for micro adjustment over final 20° range.

• Vernier resolution of 10 minutes of arc.

• 360° scale engraved every 1° with every 5° extended and every 10° numbered.

specs

Precision Rotation Stage

This rotation stage is design to apply in the experiment with samll optics. In-body positioning design in order to minimize the usage of bench. Limit screw to ensure the stop angle while adjustment. Low-friction rotary movement thanks to ball bearing mechanism, which allow for quick rotation over a continues 360° travel for both coarse and fine adjustment. Diameter of 50mm with tapped mounting holes and calibrated dial for high accuracy positional read-out.

• Full 360° coarse manual adjustment.

• Vernier resolution is as fine as 12 minutes of arc.

• Full 360° scale engraved every 2° with every 10° extended and every 20° numbered.

• Limit screw design for fine adjustment.

specs

Precision Rotation Stage

Precision rotation stage 06RSP-6 is similar to rotation stage 06RSP-4, with the same body mechanism. Micrometer head is substituted for thumbscrew to improve the accuracy of positional read-out. Versatile applications are feasible in the working surface with the diameter of 60mm.

• Full 360° coarse adjustment manually.

• Fine adjustment thanks to micrometer and with the range over 15°.

• Vernier resolution is as fine as 10 minutes of Arc.

• Full 360° scale engraved every 1° with every 5° extended and every 10° numbered.

• Load capacity is up to 1kg.

specs

Precision Rotation Stage

Precision rotation stage 06RSP-7 is similar to rotation stage 06RSP-4, with the same mechanism design. Micrometer head is substituted for thumbscrew to improve the accuracy of positional read-out. Huge component mounting applications are feasible in the large working surface with the diameter of 80mm.

• Full 360° coarse adjustment manually.

• Fine adjustment thanks to micrometer and with the range over 15°.

• Vernier resolution is as fine as 5 minutes of Arc.

• Full 360° scale engraved every 1° with every 5° extended and every 10° numbered.

• Load capacity is up to 2kg.

specs

back to top