Enquiry Form
Enquiry Form

LINKAM THMS350V Ellipsometer

The THMS350V stage enables the user to create low pressure environment during complex heating and cooling profiles. Pressure is measured directly on the sample chamber and displayed in software or on the T95-LinkPad LCD screen.

Linkam THMS350V Ellipsometer

Samples loaded onto a 0.17mm cover slip are placed on a nickel palted heating element to ensure excellent heat transfer and extremely sensitive temperature measurement. A platinum resistor sensor, accurate to 0.01°C provides far more accurate and stable temperature signal that can be achieved with a thermocouple.

Samples can be quickly characterized by heating to within a few degrees of the required temperature at a rate of up to 30°C/min with no overshoot, then slowed down to a few tenths of a degrees per minute to closely examine sample changes. The entire experiment can be saved as an online plot or exported to a spreadsheet application.

  

  • Temperature range -196 to 350°C
  • Up to 30°C/min heating
  • Temperature stability <0.1°C
  • 16 mm X,Y sample manipulation
  • Sample area 22 mm diameter
  • Gas tight chamber for atmospheric control
  • 100ohm platinum resistor sensor. 1/10th Din Class A to 0.1°C
  • Light aperture – 2.4mm Ø
  • Nickel plated copper block for high thermal conductivity
  • Direct injection of the coolant into the copper block
  • Single ultra thin lid window – 0.17mm