The LightHUB+® Plug&Play laser light engines can be equipped with up to six DPSS or diode lasers of different wavelengths in a compact and rugged design. Wavelengths between 375nm and 1550nm and optical output powers up to 300mW per laser line are possible. The LightHUB+ can be upgraded by the end-user from 1…6 wavelengths easily. Pre-assembled upgrade-kits consisting of the laser head. optical combiner block and an interface card can be installed at any time. The fiber output can be equipped with Single-Mode, polarization-maintaining fibres or Mult-Mode fibers with various ourput connectors or collimated beam diameters starting from 0.7mm. Six individual Analog and Digital Modulation Inputs as well as a RS-232 and USB Interface allow easy Integration Input control environemts. The system is designed to be both passively or actively cooled. By mounting it on a optical table or thicker breadboard, passive cooling is possible. If the system should be operated in a free-standing desk-top use, the optional active cooling unit with temperature controlled fans can be attached underneath.
Key Facts:
• Up to 6 wavelengths beam-combined and efficiently
fibre coupled in one compact housing
• Over 30 different wavelengths available
• Wavelengths upgradable by the end-user
• Single-mode, polarization maintaining or multi-mode fibre coupling
output
• Passive or active cooling with optional cooling unit
• All lasers with direct analogue and digital modulation
• Windows™ based laser control software included.
• Software drivers for Metamorph, LabVIEW and Micromanager available
| LightHUB+® – Specifications: | |
| Available models: | LightHUB+ Laser Light Engine |
| available wavelengths and powers:
(internal laser power) |
375nm / 20mW, 70mW 395nm / 120mW 405nm / 60mW, 120mW, 300mW 415nm / 120mW 425nm / 120mW 445nm / 50mW, 100mW, 500mW 457nm / 100mW, 500mW 460nm / 100mW 473nm / 20mW, 80mW, 100mW, 300mW 488nm / 20mW, 60mW, 80mW, 100mW, 150mW, 200mW 505nm / 80mW 515nm / 25mW, 50mW, 80mW, 100mW, 150mW 532nm / 50mW, 80mW, 100mW, 150mW 552nm / 20mW, 60mW, 80mW, 100mW, 150mW 561nm / 20mW, 50mW, 80mW, 100mW, 150mW 594nm / 60mW, 100mW 633nm / 100mW 638nm / 40mW, 100mW, 150mW, 200mW 642nm / 140mW 647nm / 140mW 660nm / 130mW 685nm / 50mW 705nm / 40mW 730nm / 40mW 785nm / 120mW, 200mW 808nm / 140mW 830nm / 140mW 850nm / 100mW 945nm / 200mW 980nm / 100mW 1030nm / 150mW 1060nm / 150mW 1080nm / 80mW 1310nm / 50mW 1550nm / 100mWRestrictions in some wavelenght combinations may apply. Ask for possible combinations |
| Fibre coupling: | Type: Single-mode, (PM)
or Multi-mode fibres Fibre output: FC/APC, FC/PC, FCP8 or SMA and collimated outputs diameters on customer’s demand |
| Modulation Capabilities | Analogue Modulation: up to 1.5MHz
Digital Modulation: up to 150kHz (full ON/OFF) |
| Control interfaces: | Type: USB 2.0 / RS-232
Interlock Key-Switch |
| Laser control software: | WindowsTM based laser control software |
| Supply voltage: | 12VDC or 90-240VAC, 50/60Hz |
| Available options | LH+.COOL – optional active cooling unit for LightHUB+ XX.CDRH – optional CDRH remote control box |
| Mechanical size: | L x W x H: 402mm x 402 x 97 mm (without cooling unit) L x W x H: 402mm x 402 x 182 mm (with attached cooling unit) |
Applications:
– Flow Cytometry
– Confocal Microscopy
– Optogenetics
– Test and Measurement
– Machine Vision
LightHUB+ Laser Light Engine
Front view
LightHUB+ Laser Light Engine
Rear view
LightHUB+ Laser Light Engine
Front view with optional cooling unit attached
Recommended for free-standing / desktop use
LightHUB+ Laser Light Engine
Rear view with optional cooling unit attached
Recommended for free-standing / desktop use
Each LightHUB+ laser light engine is delivered with the Omicron Control Center (OCC) – Laser Control Software. The software can control multiple lasers and offers a Master section which controls all lasers in parallel. The OCC can be used for daily use or just for configuring the laser for computer independent operation once.
