Key Facts:
• Compact One-Box design
• 23 different wavelengths between 375nm and 1550nm
• Astigmatism correction for perfect focal quality
• Single-Mode optical output powers up to 500mW
• High-Stability CW operation (ACC and APC mode)
• Fast analogue modulation >3MHz
• Ultrafast digital modulation >250MHz
• Electronic shutter function (laser inhibit) with >500kHz full ON/OFF capability
• Automatic Aging Compensation (AAC) function
• USB2.0 and RS-232 interface
• 0.7mm beam diameter option
• Industry standard footprint
• Drivers for Metamorph, LabVIEW and Micromanager available
Specifications
LuxX+® Series |
Wavelengths & Powers
(other wavelengths and
powers on request) |
LuxX+® 375-20 |
375nm / 20mW |
LuxX+® 375-70 |
375nm / 70mW |
LuxX+® 395-120 |
395nm / 120mW |
LuxX+® 405-20 |
405nm / 20mW |
LuxX+® 405-60 |
405nm / 60mW |
LuxX+® 405-120 |
405nm / 120mW |
LuxX+® 405-300 |
405nm / 300mW |
LuxX+® 415-120 |
415nm / 120mW |
LuxX+® 425-120 |
425nm / 120mW |
LuxX+® 445-50 |
445nm / 50mW |
LuxX+® 445-100 |
445nm / 100mW |
LuxX+® 445-500 |
445nm / 500mW |
LuxX+® 457-100 |
457nm / 100mW |
LuxX+® 457-500 |
457nm / 500mW |
LuxX+® 460 -100 |
460nm / 100mW |
LuxX+® 473-20 |
473nm / 20mW |
LuxX+® 473-80 |
473nm / 80mW |
LuxX+® 473-100 |
473nm / 100mW |
LuxX+® 473-300 |
473nm / 300mW |
LuxX+® 488-25 |
488nm / 25mW |
LuxX+® 488-60 |
488nm / 60mW |
LuxX+® 488-80 |
488nm / 80mW |
LuxX+® 488-100 |
488nm / 100mW |
LuxX+® 488-150 |
488nm / 150mW |
LuxX+® 488-200 |
488nm / 200mW |
LuxX+® 488-300 |
488nm / 300mW |
LuxX+® 505-80 |
505nm / 80mW |
LuxX+® 515-25 |
515nm / 25mW |
LuxX+® 515-50 |
515nm / 50mW |
LuxX+® 515-80 |
515nm / 80mW |
LuxX+® 515-100 |
515nm / 100mW |
LuxX+® 515-150 |
515nm / 150mW |
LuxX+® 633-100 |
633nm / 100mW |
LuxX+® 638-40 |
638nm / 40mW |
LuxX+® 638-100 |
638nm / 100mW |
LuxX+® 638-150 |
638nm / 150mW |
LuxX+® 638-200 |
638nm / 200mW |
LuxX+® 642-140 |
642nm / 140mW |
LuxX+® 647-140 |
647nm / 140mW |
LuxX+® 660-130 |
660nm / 130mW |
LuxX+® 675-200 |
675nm / 200mW |
LuxX+® 685-50 |
685nm / 50mW |
LuxX+® 690-200 |
690nm / 200mW |
LuxX+® 705-40 |
705nm / 40mW |
LuxX+® 730-40 |
730nm / 40mW |
LuxX+® 785-120 |
785nm / 120mW |
LuxX+® 785-200 |
785nm / 200mW |
LuxX+® 808-140 |
808nm / 140mW |
LuxX+® 830-140 |
830nm / 140mW |
LuxX+® 850-140 |
850nm / 100mW |
LuxX+® 945-200 |
945nm / 200mW |
LuxX+® 980-200 |
980nm / 200mW |
LuxX+® 1030-100 |
1030nm / 100mW |
LuxX+® 1060-150 |
1060nm / 150mW |
LuxX+® 1080-80 |
1080nm / 80mW |
LuxX+® 1310-50 |
1310nm / 50mW |
LuxX+® 1550-100 |
1550nm / 100mW |
|
Beam diameter
(other diameters on request) |
1.0 … 1.5mm (1/e²), (depends on wavelength)
0.7mm (1/e²) +/- 0.1mm with option XX.DSO |
Beam quality M² |
<1.15 (1.05 typical) |
Astigmatism (corrected) |
<0.2*ZR |
Beam ellipticity |
<1.15:1 |
Polarisation |
>100:1 vertical |
Long term power stability |
<0.5% / 8h |
RMS Noise 20Hz…20MHz |
<0.2% (CW) |
Operation Modes
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5 |
CW operation (ACC – Automatic Constant Current)
CW operation (APC – Automatic Power Control)
Analogue modulation
Digital modulation
Analogue + Digital modulation |
Analogue modulation
Input signal type |
>3MHz
0…5V (1,2kOhm) or 0…1V (50Ohm) – user configurable |
Digtal modulation
Input signal type |
>250MHz
Single-ended input: TTL (200Ohm) or 0…1V (50Ohm) – user configurable
Differential-ended input: PECL / LVDS / HSTL etc. – autom. detected |
Laser Enable (electronic shutter)
Input signal type |
>500kHz (full ON/OFF)
TTL (2kOhm) |
Rise- and falltime |
Analogue: < 100ns
Digital: < 1.5ns
Laser Enable: < 100ns |
Extinction ratio |
Analogue: > 1000 : 1
Digital: > 250 : 1
Laser Enable: infinite (full ON/OFF) |
Supply voltage |
12.00 VDC +/- 0.50 VDC |
Control interface |
RS-232 and USB 2.0 |
Dimensions laser head |
100 x 40 x 40mm (l x w x h) |
Options & Accessories |
LUXXPLUS.PSU |
world wide power supply unit for LuxX+ series lasers |
XX.DSO |
collimator objective for 0.7mm (1/e²) beam diameter |
LUXXPLUS.CDRH |
remote control box with key switch and emission LED for CDRH compliant operation |
LUXXPLUS.HEATSINK |
standard heatsink for LuxX+ Series laser heads |
XX.FASYADAP |
Fiber coupling adapter mount for LDM Series fiber coupling units and other fiber coupling systems with 1-inch grid mounting holes |
|
Applications:
– Flow Cytometry
– Confocal Microscopy
– Optogenetics
– Microlithography
– Test and Measurement
– Machine Vision
Each LuxX+ diode laser modules is delivered with the Omicron Control Center (OCC) – Laser Control Software.
The software can control multiple lasers and offers a Master section which controls all lasers in parallel. The OCC can be used for daily use or just for configuring the laser for computer independent operation once.