The PicoHarp 300 is a high-end, easy to use, plug and play Time-Correlated Single Photon Counting (TCSPC) system. It is connected to a PC through a USB 2.0 interface.
PicoQuant Stand-alone TCSPC Module with USB Interface – PicoHarp 300
The PicoHarp 300 is a high-end, easy to use, plug and play Time-Correlated Single Photon Counting (TCSPC) system. It is connected to a PC through a USB 2.0 interface. The high quality and reliability of the PicoHarp 300 is expressed by a unique 5-year limited warranty.
TheShamrock 163 Imaging Spectrographs is the most compact research-grade Czerny-Turner spectograph on the market. Its 163 mm focal length, high F/3.6 aperture and wide range of seamlessly interchangeable gratings, slits and light coupling accessories make it the ideal tool for general benchtop spectroscopy measurements..
Andor Shamrock 163 Imaging Spectrographs is the most compact research-grade Czerny-Turner spectograph on the market.
Versatile compact benchtop spectrograph
The Shamrock 163 is the most compact research-grade Czerny-Turner spectograph on the market. Its 163 mm focal length, high F/3.6 aperture and wide range of seamlessly interchangeable gratings, slits and light coupling accessories make it the ideal tool for general benchtop spectroscopy measurements.
» Compact & rugged design
» Imaging-configurable platform
» Wide range of interchangeable gratings
» Variety of fixed slits
» Large choice of light coupling interfaces
Time-resolved Confocal Fluorescence Microscope with Super-Resolution Capability
Picoquant Time-resolved Confocal Fluorescence Microscope – MicroTime 200 STED
- Complete confocal STED system based on a inverted microscope body
- Optical resolution below 50 nm
- Excitation at 640 nm and optionally with additional lasers at 595 nm and 660 nm
- Up to 4 truly parallel detection channels using SPADs or Hybrid-PMTs
- Supports gated STED (gSTED) and gSTED-FCS
- Piezo scanning for 2D- and 3D-(lifetime) imaging and accurate point positioning
- Advanced easy-to-use data acquisition, analysis and visualisation software SymPhoTime 64
- Upgrade options for simultaneous AFM/FLIM/STED measurements
- Supports all other methods available for the MicroTime 200, i.e., FLIM, FCS, FCCS, FLCS, FRET, etc.
Compact FLIM and FCS Upgrade Kit for LSMs
PicoQuant Laser Scanning Microscopes LSM Upgrade Kit
Confocal Laser Scanning Microscopes (LSMs) are widely used tools in biochemistry, cell biology, and other related life sciences.
rapidFLIM – Redefining standards for dynamic FLIM imaging
FLIM, FRET, and FCS in one turn-key system
Compact, easy-to-use and maintenance-free kit, customized to all major LSMs in various configurations for unlimited flexibility
Highest sensitivity with up to 4 detection channels
Fluorescence lifetimes from < 100 ps up to µs
Advanced and user-friendly data analysis software with multiple analysis tools
Options for anisotropy measurements and deep-tissue FLIM imaging
Upright Time-resolved Fluorescence Microscope
PicoQuant Upright Time-resovled Fluorescence Microscope – MicroTime 100
The MicroTime 100 is an idea tool for the study of time-resolved photoluminescence of solid samples such as wafers, semiconductors or solar cells. The system is based on a conventional upright microscope body that permits easy access to a wide range of sample shapes and sizes. The MicroTime 100 can be supplied with either manual scanning or with a 2D piezo scanner with either µm or cm resolution.
- -Complete system with laser combining unit, upright microscope body and detection unitomplete confocal STED system based on a inverted microscope body
- -Pulsed diode lasers with wavelengths from 375 nm to 810 nm
- -Multiple detector options for up to four detection channels
- -XY-scanning piezo stage for 2D-lifetime imaging
- -Wide range scanner with a scan range up to several cm
Thin body design for multi-channel recording.
Narishige – Micromanipulator NM25
The NMN-25 features a thin driving unit for multi-channel recording. In addition, the placement of knobs in one direction enables several manipulators to be installed and operated close together without interfering with each other. Use of an isolation table makes it easy to install multiple manipulators. The holder fixing section also has a sliding mechanism which provides up and down movement of an electrode and tension adjustment to hold it. Like the NMN-21, which was developed for patch clamping, this manual manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise and stable, free from concerns about drifting and electromagnetic disturbance.
* For attachment to the microscope, a suitable mounting adaptor is required (sold separately).
* The micromanipulator can be mounted directly on the isolation table.
*Patch Clamp Headstage Holder (sold separately) can be attached to the dedicated universal joint included with the micromanipulator.
Setting Example
Isolation System + NMN-25 Micromanipulator setting example
ITS + NMN-25 setting example
Versatile and easy-to-use camera control unit provides effortless camera control and microscope operation via mouse or touch panel operation
Nikon’s newest and most versatile microscope camera control unit DS-L3.
The Digital Sight DS-L3 is Nikon’s new stand-alone microscope camera controller. The DS-L3 stand-alone control unit is versatile, easy-to-use and provides effortless camera control and microscope operation via mouse or touch panel operation (finger or stylus).
The Bioptechs Delta T™ System is a micro-environmental control system used on microscopes to enable long term acquisition of high resolution, time-lapse images of cells.
Bioptechs Delta T™ Culture Dish System
The Delta T™ is designed to simulate host conditions on the stage of a microscope and provide an optimal optical environment for microscopy. This two-step system enables cells to be plated and observed without having to transfer them to another structure for imaging. The basic system components are, the Controller, a Stage Adapter, and Dishes. There are a variety of accessories for the Delta T™ that enable it to be used with nearly any specimen type.
The Bioptechs Objective Heater is a system specifically designed to safely and accurately warm the objective of a microscope to prevent heat loss from the specimen when using immersion lenses.
Bioptechs Objective Heater System
There are two main components, are the electronic controller and the objective heating attachment. The Bioptechs Objective Heater System is the only objective heating system that incorporates the thermal profile of the objective into the temperature control loop and regulates the objective temperature to the specimen plane where it belongs!
Complete Filter Sets for Fluorescence and Raman applications plus sets of commonly used filters for applications such as Astronomy
Continue reading “Chroma – Complete Filter Sets”
