The FluoTime 300 “EasyTau” is a fully automated, high performance fluorescence lifetime spectrometer with steady-state and phosphorescence option.
High Performance Fluorescence Lifetime Spectrometer FluoTime 300
The FluoTime 300 “EasyTau” is a fully automated, high performance fluorescence lifetime spectrometer with steady-state and phosphorescence option.The FluoTime 300 contains the complete optics and electronics for recording fluorescence decays by means of Time-Correlated Single Photon Counting (TCSPC) or Multichannel Scaling (MCS). The system is designed to be used with picosecond pulsed diode lasers, LEDs or Xenon lamps. Multiple detector options enable a large range of system configurations. When used in combination with the PMA 175 that has almost no darkcounts, the system features an ultimate sensitivity with a record breaking 24.000:1 Water Raman SNR. The FluoTime 300 can be used to study fluorescence and phosphorescence decays from few picoseconds to several seconds.
The EasyTau 2 software is an intuitive though powerful tool to acquire and analyze fluorescence spectra and lifetime decays obtained from FluoTime 300 and FluoTime 250 spectrometers.
Fluorescence Lifetime Imaging Analysis Software
- Imaging analysis with Luminosa, MicroTime 200, and LSM Upgrade Kits
- Fast analysis of FLIM, FLIM-FRET, and anisotropy data, based on GPU-accelerated algorithms
- Efficient batch analysis of z-stacks, time-lapse series and stitched images
- Advanced, flexible ROI handling
- Reproducible ROI selection incorporating histograms of fitted parameters
TheShamrock 163 Imaging Spectrographs is the most compact research-grade Czerny-Turner spectograph on the market. Its 163 mm focal length, high F/3.6 aperture and wide range of seamlessly interchangeable gratings, slits and light coupling accessories make it the ideal tool for general benchtop spectroscopy measurements..
Andor Shamrock 163 Imaging Spectrographs is the most compact research-grade Czerny-Turner spectograph on the market.
Versatile compact benchtop spectrograph
The Shamrock 163 is the most compact research-grade Czerny-Turner spectograph on the market. Its 163 mm focal length, high F/3.6 aperture and wide range of seamlessly interchangeable gratings, slits and light coupling accessories make it the ideal tool for general benchtop spectroscopy measurements.
» Compact & rugged design
» Imaging-configurable platform
» Wide range of interchangeable gratings
» Variety of fixed slits
» Large choice of light coupling interfaces
Time-resolved Confocal Fluorescence Microscope with Super-Resolution Capability
Picoquant Time-resolved Confocal Fluorescence Microscope – MicroTime 200 STED
- Complete confocal STED system based on a inverted microscope body
- Optical resolution below 50 nm
- Excitation at 640 nm and optionally with additional lasers at 595 nm and 660 nm
- Up to 4 truly parallel detection channels using SPADs or Hybrid-PMTs
- Supports gated STED (gSTED) and gSTED-FCS
- Piezo scanning for 2D- and 3D-(lifetime) imaging and accurate point positioning
- Advanced easy-to-use data acquisition, analysis and visualisation software SymPhoTime 64
- Upgrade options for simultaneous AFM/FLIM/STED measurements
- Supports all other methods available for the MicroTime 200, i.e., FLIM, FCS, FCCS, FLCS, FRET, etc.
Compact FLIM and FCS Upgrade Kit for LSMs
PicoQuant Laser Scanning Microscopes LSM Upgrade Kit
Confocal Laser Scanning Microscopes (LSMs) are widely used tools in biochemistry, cell biology, and other related life sciences.
rapidFLIM – Redefining standards for dynamic FLIM imaging
FLIM, FRET, and FCS in one turn-key system
Compact, easy-to-use and maintenance-free kit, customized to all major LSMs in various configurations for unlimited flexibility
Highest sensitivity with up to 4 detection channels
Fluorescence lifetimes from < 100 ps up to µs
Advanced and user-friendly data analysis software with multiple analysis tools
Options for anisotropy measurements and deep-tissue FLIM imaging
Thin body design for multi-channel recording.
Narishige – Micromanipulator NM25
The NMN-25 features a thin driving unit for multi-channel recording. In addition, the placement of knobs in one direction enables several manipulators to be installed and operated close together without interfering with each other. Use of an isolation table makes it easy to install multiple manipulators. The holder fixing section also has a sliding mechanism which provides up and down movement of an electrode and tension adjustment to hold it. Like the NMN-21, which was developed for patch clamping, this manual manipulator integrates coarse and fine movements, and employs a body design which absorbs vibrations. As a result, operation is precise and stable, free from concerns about drifting and electromagnetic disturbance.
* For attachment to the microscope, a suitable mounting adaptor is required (sold separately).
* The micromanipulator can be mounted directly on the isolation table.
*Patch Clamp Headstage Holder (sold separately) can be attached to the dedicated universal joint included with the micromanipulator.
Setting Example
Isolation System + NMN-25 Micromanipulator setting example
ITS + NMN-25 setting example
Versatile and easy-to-use camera control unit provides effortless camera control and microscope operation via mouse or touch panel operation
Nikon’s newest and most versatile microscope camera control unit DS-L3.
The Digital Sight DS-L3 is Nikon’s new stand-alone microscope camera controller. The DS-L3 stand-alone control unit is versatile, easy-to-use and provides effortless camera control and microscope operation via mouse or touch panel operation (finger or stylus).
The Bioptechs Delta T™ System is a micro-environmental control system used on microscopes to enable long term acquisition of high resolution, time-lapse images of cells.
Bioptechs Delta T™ Culture Dish System
The Delta T™ is designed to simulate host conditions on the stage of a microscope and provide an optimal optical environment for microscopy. This two-step system enables cells to be plated and observed without having to transfer them to another structure for imaging. The basic system components are, the Controller, a Stage Adapter, and Dishes. There are a variety of accessories for the Delta T™ that enable it to be used with nearly any specimen type.
The Bioptechs Objective Heater is a system specifically designed to safely and accurately warm the objective of a microscope to prevent heat loss from the specimen when using immersion lenses.
Bioptechs Objective Heater System
There are two main components, are the electronic controller and the objective heating attachment. The Bioptechs Objective Heater System is the only objective heating system that incorporates the thermal profile of the objective into the temperature control loop and regulates the objective temperature to the specimen plane where it belongs!
